How to Install the Handle for a uPVC Folding Door
A common issue on uPVC folding doors is that how to install the handle for a uPVC folding door. Read our guide below on how to rectify this problem.
ROPO demonstrates the professional installation process of a folding door handle on uPVC doors.
From precise hole positioning and handle alignment to secure screw fixing, this step-by-step guide shows how to ensure smooth operation, structural stability, and long-term durability.
Ideal for builders, contractors, window suppliers, and homeowners looking for reliable uPVC door hardware and professional installation standards.
Watch our ROPO Expert below, to see how to install the handle for a uPVC folding door.
| Tools you will need | Duration |
| Electric drill or Screwdriver | 10 minutes |
How to Install The Handle for a uPVC Folding Door
Follow the simple steps below to correctly install the handle on your uPVC folding door. This guide shows how to align the handle with the pre-drilled holes, insert the spindle into the mechanism, and securely fasten the screws to ensure smooth operation, stability, and reliable opening and closing of the door.
Step 1
Accessory needed: handle, handle spindle, handle screws, lock cylinder, lock cylinder screw, electric drill or screwdriver.
Step 2
First, insert the spindle; then, mount the handles on both the interior and exterior sides (note: ensure the handle with the screw holes is placed on the interior side).
Step 3
Insert the lock cylinder.
Step 4
Tighten the lock cylinder screw.
Step 5
Finally, tighten the handle screws.
Step 6
Testing and Adjustment: operate the handle to open and close the door.
